RTD logo RTD Embedded Technologies, Inc.
An AS9100 and ISO 9001 Certified Company
applications

GPS35190HR
PCIe/104 Peripheral Module for the Trimble BD970
GPS Satellite Receiver Carrier Module for Automotive and Mobile Systems

Operating Temperature -40° to +85°C

 
 
GPS35190HR GPS Carrier Module
 
GPS35190-BD970 with Trimble BD970 installed
Rugged IDAN system configurations available.
 

Features

  • PC/104 form factor
  • PCIe/104 stackable bus structure
    • PCIe universal expansion bus (Type 1 or Type 2)
  • PCIe x1 interface
  • Available in stackable, rugged enclosures
  • 16C550 UARTs for Trimble BD970 GPS receiver for Automotive and Mobile Systems
  • Marker Input available for precision time stamping
    • Time stamp or position stamp on event inputs
  • 1 PPS available externally
  • High speed serial communications
    • CPU communication to the GPS at up to 460,800 baud
    • CPU UART interface GPS COM1, COM 2, and COM3
    • CPU UART interface external RS-232/422/485 connector
    • Jumper to select GPS COM1 or COM 2 be directed to external RS-232/422/485 connector
    • Jumper to select external connector mode RS-232 or RS-422/485
    • Jumper to select GPS COM3 be directed to CAN bus
  • GPS USB external connector
  • GPS 10/100 Mbps Ethernet external connector
     

Description

The GPS35190HR is a low-power wide operating temperature range GPS receiver carrier module for use with the Trimble BD970. This receiver will work reliably in a variety of installations. Integrated on the GPS35190HR board are four complete 16C550 compatible serial ports that can be flexibly configured with jumpers to communicate with GPS or I/O connectors. The GPS antenna connects directly to the BD970. Starter kits are available. In IDAN® installations the antenna connection is brought to the front side of the IDAN frame.
 

Trimble Module Features

  • Trimble BD970 GPS Module
  • 220 Channels
    • GPS Simultaneous L1 C/A, L2E, L2C, L5; GLONASS Simultaneous L1 C/A, L1 P, L2 C/A (GLONASS M Only), L2 P; SBAS Simultaneous L1 C/A, L5; GIOVE-A BOC, E5A, E5AltBOC; GIOVE-B CBOC, E5A, E5AltBOC
  • Advanced Trimble Maxwell 6 Custom Survey GNSS Technology with a high precision multiple correlator for GNSS pseudo range measurements
  • Low now GNSS Carrier phase measurements with <1 mm precision in a 1Hz bandwidth
  • Proven Trimble low elevation tracking technology
  • Initialization time <10 seconds typical, with a reliability of >99.9%
  • Multiple interfaces to GPS module:
    • 1 USB port
    • 1 CAN port
    • 1 LAN Ethernet port: 10/100 Base T, all function performed through a single IP address including GUI access and raw data streaming. Support for HTTP, NTP Server, NMEA, GSOR, CMR over TCP/IP or UDP, NTripCaster, NTripServer, NTripCLient, mDNS/uPnP Service discovery, Dynamic DNS, email alerts, Network link to Google Earth, and support for external modems via PPP
    • 3 RS232 port with baud rates up to 115000
    • 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz and 50 Hz positioning outputs
  • Reference outputs: CMR, CMR+, RTCM 2.1, 2.2, 2.3, 3.0, 3.1
  • Navigation Outputs: ASCII: NMEA-0183 GSV, AVT, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS and Binary: Trimble GSOF
  • Control Software: HTML (IE 7.0 or later), Firefox (3.5 or later), Safari 4.0, Opera 9, Google Chrome
  • Operating Temperature: -40 to +75 C
  • Antennae connector MMCX receptacle
     

Software

  • GPS data available to CPU via three COM ports
  • GPS data available to external devices via serial ports, USB port, Ethernet, or CAN bus
  • PCIe UART COM Port drivers for:
    • Windows XP and Windows 7
    • Linux 2.6 (drivers built into kernels >2.6.37)
  • Includes RTD GPS Software
    • For Windows and Linux
    • Full source code provided
    • Includes sample code reading and interpreting GPS data
  • Trimble GPS software when purchasing optional module
    • USB Configuration Software
    • Ethernet using Web Browser
    • BDxxx Configuration Toolkit
       

Recommended Accessories

Physical Attributes

  • Dimensions
    • Length: 3.775 inches (95.89 mm)
    • Width: 4.570 inches (116.078 mm)
    • Stand-off Height: 0.600 inches (15.24 mm)
  • Size: 107mm L x 96mm W x 15mm H (4.2"L x 3.8"W x 0.6"H)
  • Weight: Approximately 0.07 Kg (0.16 lbs.)
  • Operating Temperature: -40° to +85°C: 90% humidity non-condensing
  • Storage Temperature: -55° to +125 °C
  • MTBF: 2,602,250 hours
  • Power Requirements: 0.5 W @ 5 VDC typical
  • Note: Specifications for GPS35190HR carrier module only. Specifications for GPS module may vary.
     

Documentation and Downloads

Ordering Information

Part Number Description Value
OEM

GPS35190HR

  Carrier module only. Trimble engine not installed.

$495

GPS35190HR-BD970

  Carrier module with Trimble BD970 module installed.

RFQ

(RFQ) - Request for Quote required. Pricing and Delivery available at sales@rtd.com


RTD Embedded Technologies, Inc.
Designed and Made in the USA
sales@rtd.com   |   +1-814-234-8087